User's Manual

550 Headset support
3 Press the Enter key to activate Bluetooth wireless technology.
A check mark is displayed on the Enable Bluetooth item to
indicate that Bluetooth wireless technology is activated. The
message Bluetooth Enabled appears at the bottom of the
display.
4 Put your Bluetooth wireless technology headset in its pairing
or search mode. The procedure for doing this can be different
for each wireless headset. See the documentation that
accompanies your headset.
5 Search for the headset.
a Press the Right navigation key twice to highlight the Search
button, displayed next to the Search Devices item.
b Press the Enter key.
The message Searching... is displayed.
c If the search is successful, a list of Bluetooth wireless
technology headsets appears in the Found: box.
d Choose one of the following
• If the search is successful, proceed to step 6.
• If the search is not successful, the message Search
completed. No device found is displayed. Power off the
wireless technology, and repeat step 4 and step 5.
6 Wait for the search to finish or press the Stop soft key to end the
search.
7 Choose one of the following
• If your headset is displayed as the first item in the Found box,
proceed to step 8.
•
If your headset is not displayed as the first item in the Found
box, select your headset from the list, as follows
a Press the Right navigation key one or more times to highlight
the Found: box. Press the Enter key to start the edit mode.
b Press the Down navigation key to open the list. Press
the Up/Down navigation keys to scroll and highlight your
headset.
c Press the Enter key to select the headset and close the list.
Press the Enter key to exit edit mode.
8 Press the Right navigation key one or more times to highlight
the Pair button (next to the Pair Device item) and press the
Enter key.
a A dialog box appears, with the prompt Enter PIN#.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.