User's Manual

560 TFTP Server
3 If you statically assign IP addresses, ensure that the IP address,
TFTP Server IP Address, Subnet Mask, and Default Gateway
information are accurate. If you are using a DHCP Server,
ensure the DHCP options are configured.
4 Enter the TFTP Server IP address in the configuration menu,
and reboot the IP Phone.
--End--
Updating the IP Phone 2007 firmware
The IP Phone 2007 can perform TFTP firmware upgrade from within the
Tools menu. This method requires the TFTP Server to store the following
files in the root directory:
•
i2007.cfg – downloading script file
•
0625Cxx.bin – firmware image file
i2007.img is the name of the firmware file by default, but the location
and the name of the firmware image file being downloaded is specified
in the i2007.cfg file and can be any name. The name of the firmware
image file can be specified in relative path name notation (for example,
/subfolder/name.ext or name.ext).
Table 85 "Fields in the TFTP configuration file" (page 560) describes
the fields in the configuration file on the TFTP Server. The download
mode can be set to AUTO or FORCED. It is recommended that you set
DOWNLOAD_MODE to AUTO.
ATTENTION
The [FW] field cannot be present in the configuration file for IP Phone 2007.
Table 85
Fields in the TFTP configuration file
Field Name Field Value Descriptions
AUTO Recommended setting. The application looks
at the version and downloads the FW if it is a
newer version than what is on the phone.
DOWNLOAD_MODE
FORCED The version of firmware is ignored. The
firmware is always downloaded.
VERSION 0625Cxx The version string compared to what is on the
phone.
FILENAME 0625Cxx.bin Image file name. Must match the file name of
the actual IP Phone FW file.
PROTOCOL TFTP Download protocol. Must be TFTP.
SERVER_IP
xxx.xxx.xxx.xxx
IP Address of the TFTP server in decimal.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.