User's Manual

Updating IP Phones firmware 561
Use Procedure 150 “Downloading the firmware for the IP Phone 2007”
(page 561) to upgrade the firmware for the IP Phone 2007.
Procedure 150
Downloading the firmware for the IP Phone 2007
ATTENTION
Nortel recommends that the user ends an active call before performing firmware
upgrade otherwise results can be unpredictable.
Step Action
1 Download the latest IP Phones firmware from the Nortel Web
site.
2 Load the latest version of the IP Phones firmware and place it on
the TFTP Server. Ensure the TFTP Server is started.
3 Tap the Tools icon to access the Local Tools menu.
4 Tap 3. Network Configuration.
5 Use the Up and Down navigation keys to scroll and highlight the
TFTP IP field.
6 Enter the IP address for the TFTP Server in the TFTP IP field.
7 Tap Apply/Reset.
The IP Phone 2007 goes blank briefly, then “Nortel” appears on
the bottom left of the screen. The phone restarts and "Nortel”
appears in them middle of the screen. Then the firmware version
appears on the middle of the screen “F/W Version xxxxxxx”.
After an 8-second count down the screen displays “Attempting
TFTP
”. Then “Downloading updates” appears.
--End--
Updating the firmware
This section describes the firmware upgrade process for the following IP
Phones:
IP Phone 1110
IP Phone 1120E
IP Phone 1140E
IP Phone 1150E
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.