User's Manual

562 TFTP Server
Automatic TFTP download at bootup
If a TFTP IP address has been configured and a firmware upgrade is
available on the server when the phone restarts, the phone executes the
automatic TFTP download. This method requires the TFTP Server to store
the .cfg and 0625Cxx.bin files for the IP Phone in the root directory.
For example, the IP Phone 1110, IP Phone 1120E, IP Phone 1140E, and
IP Phone 1150E require the following files:
•
1110.cfg
0625Cxx.bin
• 1120e.cfg
0625Cxx.bin
•
1140e.cfg
0625Cxx.bin
• 1150e.cfg
0625Cxx.bin
0625Cxx.bin is the name of the firmware file by default, but the
location and the name of the firmware image file being downloaded
is specified in .cfg and can be any name. The name of the firmware
image file can be specified in relative path name notation (for example,
/subfolder/name.ext or name.ext).
Table 86 "Fields in the TFTP configuration file" (page 562) describes
the fields in the configuration file on the TFTP Server. The download
mode can be set to AUTO or FORCED. It is recommended that you set
DOWNLOAD_MODE to AUTO.
Table 86
Fields in the TFTP configuration file
Field Name Field Value Descriptions
[FW] Section header for firmware download
information.
AUTO Recommended setting. The application looks
at the version and downloads the FW if it is a
newer version than what is on the phone.
DOWNLOAD_MODE
FORCED The version of firmware is ignored. The
firmware is always downloaded.
VERSION 0625Cxx The version string compared to what is on the
phone.
FILENAME 0625Cxx.bin Image file name. Must match the file name of
the actual IP Phone FW file.
PROTOCOL TFTP Download protocol. Must be TFTP.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.