User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

561

562

563

564

565

566

567

568

569

570

564 TFTP Server

manually configure the phone to point to that TFTP Server. The BootC

firmware carries out the upgrade. To initiate the firmware download task,

BootC must be triggered to run.

You can create the configuration file with a default file name, such as

1140E.img so you do not have to change the file name each time a new

IP Phone 1140E firmware load is released. However, if you take this

approach, be sure to rename the released firmware file (for example,

0625Cxx.bin) to the default file name when the new firmware file is copied

into the TFTP Server root directory and to update the VERSION string in

the configuration file.

After the configuration file and the image file are in the TFTP Server root

directory, use Procedure 152 “Upgrading the firmware using BootC” (page

564) to upgrade the firmware using BootC.

Procedure 152

Upgrading the ﬁrmware using BootC

Step Action

1 Hold down the [Up] and [2] keys, and while doing so, repower

the phone. When the phone restarts, it loads and runs BootC

instead of the application. When the Msg Waiting LEDs go off,

you can release the [Up] and [2] keys.

2 The following text menu on a white background appears:

11x0 IP Phone

Manual Configuration

Nortel

If you do not see this message, you are in the wrong menu.

Repeat step 1. If BootC is damaged from a power reset, hold

down the [Up] and [3] keys to use the backup BootC.

3 When Nortel appears on the screen, press the soft keys 1,2,3,4

in sequence (left to right). BootC goes to manual configuration. If

you miss this step, and the phone begins to register to the TPS,

repeat step 1.

4 Follow the prompts to configure DHCP and other IP parameters

or, if DHCP and other parameters are already configured, just

continue pressing the 1 soft key or OK. The soft keys functions

are listed below:

• soft key 1 (below the LCD) is OK

• soft key 2 is BackSpace

• soft key 3 is Clear

• soft key 4 is Cancel

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009