User's Manual

Downloading and configuring fonts 567
Table 88
Fields in the TFTP configuration file for downloadable fonts
Field Name Field Value Description
[FONTxx] Section header for the font file, which contains
font information, including the optional download
parameters, versions, and how to use the
font after it is downloaded. Only [FONT01] to
[FONT10] are supported.
DOWNLOAD_MODE AUTO Recommended setting. The application looks
at the version and downloads the font if it is a
newer version than the one on the phone.
FORCED The version of the font is ignored. The
configuration file is always downloaded.
PROTOCOL TFTP Download protocol. Must be TFTP.
SERVER_IP
xxx.xxx.xxx.xxx
IP Address of the TFTP server in decimal.
SECURITY_MODE
0
For future use.
FILENAME Image file name. Must match the file name of
the actual IP Phone FW file.
ALIAS Enables the font to have a different name in the
IP Phone file system than the one on the Call
Server.
VERSION The version string compared to what is on the
phone.
FONTLANG Configuration command that defines the
language codes for which a font is used.
FONTLANG = languagelist
Where:
languagelist is a comma separated list of
ISO 639-2/RFC 3066 codes. See the Display
Manager Assign IT Language UNIStim message
for details on language codes.
MAP
Configuration command that defines how the
font is mapped in the Unicode character set.
MAP xx xx xx xx xx xx xx xx xx xx
Where:
xx…xx = 10 hex bytes defining the Unicode
ranges for a font in the same format as the IT
Character Set Report.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.