User's Manual

568 TFTP Server

Figure 85

Sample of the font configuration file

For information about downloading the font file from the Nortel Web site,

see IP Line Fundamentals (NN43100-500).

Procedure 153

Downloading a font ﬁle

Step Action

1 The version number is compared to the version number of the

file (for example, chinese.ccc) in the file system, if it exists. See

Figure 85 "Sample of the font configuration file" (page 568).

2 If the file does not exist in the file system, or if the version is

older than the VERSION specified (for example, 1.1), then the IP

Phone downloads the font from the TFTP Server.

As the [FONTxx] sections are processed, the FONTLANG

configuration command is also processed. This command

defines the language codes for which a font is used. The MAP

configuration command defines how the font is mapped in

the Unicode character set. This command maps the font (for

example, chinese.ccc) to the UNICODE pages (for example,

0x3000-0xE000 and 0xF100) and associates the font to the

Traditional Chinese language code (for example, zu-Hant).

The [LANGUAGE] section specifies the prompt files for the IP

Phone. The prompt file is only downloaded to the file system

if the version is higher than the existing prompt version, or if

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 02.07

5 February 2009