User's Manual

76 Nortel IP Phone 2002
Screen prompt
Description
S2 action
Same as S1.
You are not prompted for S2 PK if S2
Action is set to 1.
S2 retry count Same as S1.
S2 PK
To manually configure the PK, set the
Action Byte to 6. After you enter the PK,
apply the changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate Secure
Multimedia Controller to which the IP
Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit hexadecimal
number.
To enter ALPHA digits from a to f, enter
the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Speed (0-A, 1-10, 2-100) Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if
Speed is set to 0 for Auto.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.