User's Manual

84 Nortel IP Phone 2002
Screen prompt
Description
Speed (0-A, 1-10, 2-100) Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if
Speed is set to 0 for Auto.
Cfg XAS? (0-No,1-Yes)
Default 0 (for No).
If no External Application Server
(XAS) is present, enter 0 (for No).
You are not prompted to enter the
XAS IP address.
XAS IP: Enter the IP address of the XAS
server.
9 Enter the following parameters:
Screen prompt
Description
802.1Q (0-No, 1-Yes) Default 1 (for Yes).
Voice VLAN (0-N, 1-Y) Default 0 (for No).
You are not prompted for Voice VLAN if
802.1Q is not enabled.
VLAN Cfg? (0-Auto,
1-Man)
Default 0 (for Auto).
0-Auto
Automatically obtains VLAN ID using
DHCP, or the 802.1ab data switch.
1-Man
Enter the VLAN ID manually. This is a
number from 1 to 4094.
You are not prompted for VLAN Cfg if
Voice VLAN is not enabled.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.