User's Manual

86 Nortel IP Phone 2002
Screen prompt
Description
Data VLAN? (0-N, 1-Y) Default 0 (for No).
You are not prompted for Data VLAN if
PC port is set to 0 for Off.
Data VLAN? (0-N, 1-Y) Default 0 (for No).
You are not prompted for Data VLAN if
PC port is set to 0 for Off.
Data VLAN Cfg? (0-Auto,
1-Man)
Default 1 (for Man)
You are not prompted for Data VLAN
Cfg if LLDP or Data VLAN are not
enabled and PC Port is set to 0 for Off.
If you select 0 (for Auto), VLAN ID is
automatically configured to the value
received in the VLAN NAME TLV.
Data VLAN ID:
You are not prompted for Data VLAN ID
if Data VLAN is set to 0 for Auto.
Data pBits (0-7, 8-Au) Default 8 (for Au).
You are not prompted for Data pBits
if the PC Port is set to 0 for Off or if
802.1Q is not enabled.
PCUntagAll? (0-N, 1-Y) Default 0 (for No).
PSK SRTP? (0-No,
1-Yes)
Default 0 (for No).
GARP Ignore?
(0-No,1-Yes)
Default 0 (for No).
The IP Phone 2002 searches for the connect server.
10 Enter the following information:
Screen prompt
Description
Password
IP Phone Installer Password.
You are not prompted to enter the IP
Phone Installer Password if it has not
been configured in your Call Server.
Node the node ID.
TN the TN or VTN.
The IP Phone 2002 registers with the TPS and, if needed, begins
the firmware download. This takes several minutes. When
complete, the IP Phone 2002 resets.
The current Call Server date and time appear on the top line of
the display when the configuration is complete. Self-labeling
keys also appear.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.