User's Manual

100 Nortel IP Audio Conference Phone 2033

Procedure 19

Changing the TN of an existing IP Audio Conference Phone 2033

Step Action

1 Repower the IP Audio Conference Phone 2033.

During the reboot sequence of a previously configured the

IP Audio Conference Phone 2033 displays the existing node

number for approximately five seconds.

2 If the node password is enabled and NULL, choose one of the

following:

a Disable the password.

b Set the password as non-NULL.

3 Press OK when the node number displays.

If Then

the node password is enabled

and is not NULL

a password screen displays. Go

to Step 4.

the node password is disabled a TN screen displays. Go to Step

4 Enter the password at the password screen, and press OK.

A TN screen displays.

To obtain the password, enter the nodePwdShow command in

Element Manager. For further information, see Element Manager

System Reference - Administration (NN43001-632).

5 Select the Shift soft key labeled (>>) and press Clear to edit the

TN field. The IP Audio Conference Phone 2033 by default places

you in the units field of the TN. You cannot use backspace to

move to the loop, shelf or card fields.

6 Enter the new TN.

--End--

Replacing an IP Audio Conference Phone 2033

ATTENTION

Two IP Phones cannot share the same TN. You must remove the IP Audio

Conference Phone 2033 that currently uses the TN.

Procedure 20

Replacing an IP Audio Conference Phone 2033

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010