User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

101

102

103

104

105

106

107

108

109

110

Touch panel 109

Calibrate the touch panel

Calibrate the touch panel through the Tools menu, which enables you to

fine-tune the touch panel. You are prompted to use the stylus to tap three

targets.

For further information, see Procedure 23 “Calibrating the touch panel and

stylus” (page 109).

Stylus

Operate the touch panel using a stylus or your finger. However, use of a

stylus is recommended to avoid damage to the touch panel.

Procedure 23

Calibrating the touch panel and stylus

Step Action

1 Tap the Tools icon to calibrate the touch panel and stylus.

2 Tap the Touch Panel Setup soft key.

The screen displays a calibration map, the Cancel soft key is

displayed, and the following system prompt is displayed:

Touch the center of the red ball.

3 Use the stylus and tap each of the red dots, in order, starting

with the lower left portion of the screen, and following the

sequence as prompted.

After the third dot is tapped, the display changes to indicate the

result of calibration.

• If the calibration is successful, the IP Phone displays the

following report:

Data calibration is CORRECT.

Save Data calibration?

YES and NO soft keys and calibration statistics are displayed

on the screen.

Tap the YES soft key to save the calibration settings and exit

to the main display or tap the NO soft key to abandon the

calibration settings and exit to the main display.

• If the calibration is unsuccessful, the IP Phone displays the

following report:

Data calibration is WRONG.

Repeat calibration?

YES and NO soft keys and calibration statistics are displayed

on the screen.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010