User's Manual

110 Nortel IP Phone 2007
Tap the YES soft key to retry the calibration or tap the NO
soft key to abandon the calibration and return to the main
display.
--End--
Dialpad entry
Certain configuration items on the phone require alpha-numeric, special
characters or hex input, depending on the input field. For ease of use,
Nortel recommends the use of the external USB keyboard. Nortel IP
Phone 2007 also provides an on-screen touch keyboard to facilitate data
input. However, dialpad may also be used for entering alpha-numeric or
special characters.
The following rules apply when you enter text and special characters using
the dialpad.
• Press a key from 0 to 9 once to enter the corresponding number.
•
Press a key from 2 to 9 repeatedly to cycle through the letters
assigned to that key, first in lower case and then in upper case.
For example, if you press the 5 key repeatedly, the following
characters are displayed, one at a time:
j -> k -> l -> J -> K -> L -> 5 ->
See Table 24 "Character key mappings" (page 111) for character key
mappings.
•
The insertion point remains in its current position as long as you
continue to press the same key.
• The entry is accepted if either a new key is pressed or if two seconds
pass with no entry. The insertion point moves 1 space to the right.
For example, to enter the word Nortel, press the following key
sequence:
6 [2 second delay] 67835
Although special characters are not required, key 1 generates
commonly used special characters, such as the period (.), at symbol
(@), and underscore (_).
• Double press the asterisk key ** to generate a period (.). This is a
useful shortcut when entering IP addresses.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.