User's Manual

Installation and configuration 117
Table 26
IP Phone 2007 component list (cont’d.)
Component
Product code
Handset cord (charcoal) N0089571 / N0212463
Footstand (charcoal) N0089561
Power supply
IP Phone Global power supply (2000, 1100, 1200) NTYS17xxE6
IP Phone 2007 power cords
Standard IEC Cable-North America NTYS14AAE6
Standard IEC Cable-Australia/NZ NTTK15AA
Standard IEC Cable-Europe NTTK16ABE6
Standard IEC Cable-Switzerland NTTK17ABE6
Standard IEC Cable-UK NTTK18ABE6
Standard IEC Cable-Denmark NTTK22ABE6
Standard IEC Cable-Argentina A0814961
Standard IEC Cable-Japan NTTK26AAE6
IP Phone 2007 Stylus
IP Phone 2007 Stylus (RoHS) N0089577
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 2007:
• “Before you begin” (page 117)
•
“First-time installation” (page 118)
•
“Configuring the IP Phone 2007” (page 118)
•
“Connecting the components” (page 119)
• “Startup sequence” (page 119)
Before you begin
Before installing the IP Phone 2007, complete the following pre-installation
checklist:
• Ensure one IP Phone 2007 boxed package exists for each IP Phone
2007 you install. For a list of IP Phone 2007 package components, see
Table 25 "Package components" (page 116).
• Ensure one Software License exists for each IP Phone 2007 you
install.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.