User's Manual

124 Nortel IP Phone 1210

If power to the phone is interrupted after you install and configure an IP

phone, you are not required to reenter the IP Parameters, Node Numbers,

or Terminal Number (TN). There is also no need to again acquire the

firmware.

Description

The IP Phone 1210 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 1210

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 1210 network and CS 1000

connections.

Figure 22 "IP Phone 1210" (page 124) shows the IP Phone 1210.

Figure 22

IP Phone 1210

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010