User's Manual

Installation and configuration 131
Table 31
IP Phone 1210 components list (cont’d.)
Component
250 VAC, Option 11C Standard European power cord, Other EMEA,
Kenya, Korea, Thailand, Indonesia, Vietnam, India, Pakistan
NTTK16ABE6
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord Switzerland NTTK17ABE6
240 VAC, Option 11C UK power cord Hong Kong, Ireland, United
Kingdom, Singapore, Malaysia, Bangladesh, Brunei, Sri Lanka
NTTK18ABE6
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord Denmark NTTK22ABE6
Argentina
Note: ROHS does not apply in this region.
A0814961
1.8 m (5.9 ft), 10 amp, IEC320-C13 Japan NTTK26AAE6
For more information about previous versions of the IP Phone, contact
your Nortel representative.
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1210:
• “Before you begin” (page 131)
•
“First-time installation” (page 132)
•
“Configuring the IP Phone 1210” (page 132)
•
“Connecting the components” (page 133)
•
“Startup sequence” (page 135)
Before you begin
Before installing the IP Phone 1210, complete the following preinstallation
checklist:
•
Ensure one IP Phone 1210 boxed package exists for each IP Phone
1210 you install. For a list of IP Phone 1210 package components, see
Table 30 "Package components" (page 130).
• Ensure one software license exists for each IP Phone 1210 you install.
• Ensure the host call server is equipped with a Signaling Server that
runs the Line Terminal Proxy Server (LTPS) application.
• If a global power supply is required, ensure you use the approved
Nortel global power supply (model number NTYS17xxE6).
• Ensure the latest IP Phone firmware is deployed to the IP telephony
node. For more information, see Signaling Server IP Line Applications
Fundamentals (NN43001-125).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.