User's Manual

Installation and configuration 133

Connecting the components

Use Procedure 29 “Connecting the components” (page 133) to connect the

components for the IP Phone. See Figure 24 "IP Phone 1210 connections"

(page 133).

Procedure 29

Connecting the components

Step Action

1 Attach the footstand (optional). Attach the foot stand in the

appropriate slots depending on the desired angle for your IP

Phone. If you insert the foot stand into the upper slots, your IP

Phone sits at a 25-degree angle. If you insert the foot stand into

the lower slots, your IP Phone sits at a 55-degree angle.

If you install the IP Phone on the wall, do not attach the

footstand.

Figure 24 "IP Phone 1210 connections" (page 133) shows the

back of the IP Phone.

Figure 24

IP Phone 1210 connections

a Align the bottom tabs on the foot stand with the position 1

slots or the position 2 slots on the back of your IP Phone. In

position 1 the IP Phone sits at a 25-degree angle. In position

2 the IP Phone sits at a 55-degree angle.

b Press the footstand into the slots until it snaps into place.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010