User's Manual

136 Nortel IP Phone 1210
The IP Phone is configured for automatic provisioning by default. For
more information about provisioning the IP Phone automatically, see
“Provisioning the IP Phones” (page 491).
You can manually configure all or some parameters. For information
about manually provisioning the IP Phone, see “Manual provisioning of IP
Phones 1110 and 1200 Series” (page 533).
Redeploying an IP Phone 1210
You can redeploy an existing previously-configured IP Phone 1210 on
the same system. For example, you can assign the IP Phone 1210 to a
new user (new TN) or to an existing user who moved to a new subnet
by changing the TN of the IP Phone 1210. For further information, see
Converging the Data Network with VoIP Fundamentals (NN43001-260).
Procedure 30
Redeploying the TN of an existing IP Phone 1210
Step Action
1 Repower the IP Phone 1210.
During the reboot sequence of a previously configured IP
Phone, the IP Phone 1210 displays the existing node number
for approximately 5 seconds.
2 If you configure the node password to NULL, choose one of the
following:
a Disable the password.
b Set the password as nonNULL.
3 Press OK when the node number displays.
If Then
you configure the node password
to NULL
a password screen displays. Go
to Step 4.
the node password is disabled a TN screen displays. Go to Step
5.
4 Enter password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For more information, see Element Manager
System Reference - Administration (NN43001-632).
5 Select the Clear soft key to clear the existing TN.
6 Enter the new TN.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.