User's Manual

152 Nortel IP Phone 1220
c Set up the headset according to the instructions included with
the headset.
4 Connect the global power supply (optional).
The IP Phone 1220 supports both AC power and Power over
LAN options, including IEEE 802.3af Power Classification 2.
To use PoE, where power is delivered over the CAT5-e cable,
the LAN must support PoE, and the global power supply is not
required. To use local AC power, you can order the optional
global power supply separately.
WARNING
Use your IP Phone 1220 with the approved Nortel
global power supply (model number NTYS17xxE6).
The IP Phone 1220 supports both AC power and PoL
options, including IEEE 802.3af Power Classification
2.
a Connect the Direct Current (DC) barrel connector to the
power jack on the back of the IP Phone.
b Thread the cable through the channel in the foot stand to
secure the cable.
c Plug the country-specific IEC cable into the global power
supply, and then plug the global power supply into the
nearest AC power outlet.
5 Install the Ethernet cable. Connect one end of the supplied
Ethernet cable to the back of your phone using the CAT5-e
connector (LAN Ethernet port), and thread the network cable
through the channel in the footstand.
6 Connect the other end of the cable to your LAN Ethernet
connection. The LAN LED on the back of the IP Phone lights
when a LAN connection is established.
7 If you connect your PC through the phone, a second CAT5-e
cable is required. Only one cable is included with the IP Phone
1220 package. Install the Ethernet cable connecting the PC to
the phone (optional). Connect one end of the PC Ethernet cable
to your phone using the CAT5-e connector (PC Ethernet port),
and thread it through channel in the footstand. Connect the other
end to the LAN connector on the back of your PC.
The LAN Ethernet port supports Auto-Media Dependent Interface
Crossover (MDIX). Auto-MDIX is supported only when the
Ethernet port is configured for autonegotiation. The PC Port
does not support Auto-MDIX.
8 Wall mount the IP Phone 1220 (optional):
a Remove the footstand.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.