User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

161

162

163

164

165

166

167

168

169

170

170 Nortel IP Phone 1230

c Set up the headset according to the instructions included with

the headset.

4 Connect the global power supply (optional).

The IP Phone 1230 supports both AC power and Power

over Ethernet (PoE) options, including IEEE 802.3af Power

Classification 2. To use PoE, where power is delivered over the

CAT5-e cable, the LAN must support PoE, and the global power

supply is not required. To use local AC power, you can order the

optional global power supply separately.

WARNING

Use your IP Phone 1230 with the approved Nortel

global power supply (model number NTYS17xxE6).

The IP Phone 1230 supports both AC power and PoL

options, including IEEE 802.3af Power Classification

a Connect the Direct Current (DC) barrel connector to the

power jack on the back of the IP Phone.

b Thread the cable through the channel in the footstand to

secure the cable.

c Plug the country-specific IEC cable into the global power

supply, and then plug the global power supply into the

nearest AC power outlet.

5 Install the Ethernet cable. Connect one end of the supplied

Ethernet cable to the back of your phone using the CAT5-e

connector (LAN Ethernet port), and thread the network cable

through the channel in the footstand.

6 Connect the other end of the cable to your LAN Ethernet

connection. The LAN LED on the back of the IP Phone lights

when a LAN connection is established.

7 If you connect your PC through the phone, a second CAT5-e

cable is required. Only one cable is included with the IP Phone

1230 package. Install the Ethernet cable connecting the PC to

the phone (optional). Connect one end of the PC Ethernet cable

to your phone using the CAT5-e connector (PC Ethernet port),

and thread it through channel in the footstand. Connect the other

end to the LAN connector on the back of your PC.

The LAN Ethernet port supports Auto-Media Dependent Interface

Crossover (MDIX). Auto-MDIX is supported only when the

Ethernet port is configured for autonegotiation. The PC Port

does not support Auto-MDIX.

8 Wall mount the IP Phone 1230 (optional):

a Remove the footstand.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010