User's Manual

Removing an IP Phone 1230 from service 173

3 Follow “Configuring the IP Phone 1230” (page 168) to install

the IP Phone 1230. To configure the IP Phone, see “Manual

provisioning of IP Phones 1110 and 1200 Series” (page 533).

4 Enter the same TN and node number as the IP Phone 1230 you

replaced. The Call Server associates the new IP Phone 1230

with the existing TN.

--End--

Removing an IP Phone 1230 from service

Procedure 42

Removing an IP Phone 1230 from service

Step Action

1 Disconnect the IP Phone 1230 from the network or turn off the

power.

The service to the PC is disconnected as well if the PC connects

to the IP Phone 1230.

If the IP Phone 1230 was automatically configured, the DHCP

lease expires and the IP address returns to the available pool.

2 In LD 11, enter the following:

REQ: OUT

TYPE: 1230

TN: LLL S CC UU

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010