User's Manual

186 Nortel IP Phones 1200 Series LCD Expansion Module
match the administered configuration. When a second LCD Expansion
Module is detected, the TPS changes the key assignments to display
across both LCD Expansion Modules.
If you configure two LCD Expansion Modules in LD 11 but three LCD
Expansion Modules respond, the TPS assigns the keys 32 to 55 to the
first two LCD Expansion Modules. The third LCD Expansion Module does
not have keys assigned until it is configured in LD 11. An error message
alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure two LCD Expansion Modules in LD 11 but four LCD
Expansion Modules respond, the TPS assigns the keys 32 to 55 to the first
two LCD Expansion Modules. The fourth LCD Expansion Module does
not have keys assigned until it is configured in LD 11. An error message
alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure three LCD Expansion Modules but only one LCD
Expansion Module responds, the TPS assigns the keys 32 to 55 to the
single LCD Expansion Module (using the Second Page functionality).
When a second then the third LCD Expansion Module is detected, the TPS
changes the key assignments to display across all three LCD Expansion
Modules.
If you configure three Expansion Modules in LD 11 but two LCD Expansion
Modules respond, the TPS assigns keys 32 to 67 to the first two LCD
Expansion Modules. An error message alerts the administrator that the
hardware configuration does not match the administered configuration.
When a third LCD Expansion Module is detected, the TPS changes the
key assignments to display across all three LCD Expansion Modules.
If you configure three LCD Expansion Modules in LD 11 but four LCD
Expansion Modules respond, the TPS assigns keys 32 to 67 to the first
three LCD Expansion Modules. The fourth LCD Expansion Module does
not have keys assigned until it is configured in LD 11. An error message
alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure four LCD Expansion Modules but only one LCD Expansion
Module responds, the TPS assigns the keys 32 to 55 to the single LCD
Expansion Module (using the Second Page functionality). When a second,
third, and fourth LCD Expansion Modules are detected, the TPS changes
the key assignments to display across all four LCD Expansion Modules.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.