User's Manual

Redeploying the IP Softphone 2050 237
8 Click OK.
--End--
To verify Windows QoS Packet Scheduler is installed, go to Control Panel
> Network Connections (Windows XP) or Network and Dialup Connections
(Windows 2000) > Local Area Connection > Properties > QoS Packet
Scheduler.
Running the IP Softphone 2050 for the first time
Start the IP Softphone 2050 in one of the following ways
• Select Start > Programs > Nortel > IP Softphone 2050.
• Click the desktop shortcut (if one was created during the installation).
• Click Automatic startup sequence.
If you want the IP Softphone 2050 to start automatically when the PC
starts, create a shortcut to the application in the Startup folder
When an IP Softphone 2050 is started for the first time and connects to the
network, the IP Softphone executes the following start-up sequence
1. Obtain the IP parameters.
2.
Find a Media Gateway server and authenticate the user.
As the IP Softphone 2050 registers with the Signaling Server, one of the
following occurs
•
If a non-null node password is enabled, you are prompted to enter the
node number and password. Use the keyboard or numeric keypad
to enter the prompts for a node number and password. After the
password is verified, enter the TN of the IP Softphone 2050. See
Signaling Server IP Line Applications Fundamentals (NN43001-125) for
further information about the password feature.
• If the null node password is configured and enabled, these screens are
skipped and no option is provided to change the password.
• If the node password is disabled or not configured, it prompts for
a node number and TN. Enter the node number and TN using the
keyboard or numeric keypad.
Redeploying the IP Softphone 2050
This procedure is required for a new user of the IP Softphone 2050
application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.