User's Manual

330 Nortel IP Phone 1140E

3 Follow “Configuring the IP Phone 1140E” (page 322) to install

the IP Phone 1140E. To configure the IP Phone, see “Manual

provisioning of IP Phones 2007 and 1100 Series” (page 541).

4 Enter the same TN and Node Number as the IP Phone 1140E

you replaced. The Call Server associates the new IP Phone

1140E with the existing TN.

--End--

Removing an IP Phone 1140E from service

Procedure 90

Removing an IP Phone 1140E from service

Step Action

1 Disconnect the IP Phone 1140E from the network or turn the

power off.

The service to the PC is disconnected as well if the PC connects

to the IP Phone 1140E.

If the IP Phone 1140E was automatically configured, the DHCP

lease expires and the IP address returns to the available pool.

2 In LD 11, enter the following:

REQ: OUT

TYPE: 1140

TN: LLL S CC UU

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010