User's Manual

Installation and configuration 345
Table 80
IP Phone 1150E component list (cont’d.)
Component
Product code
2.4 m (8 ft), 240 VAC 10 amp, ANZ power cord AS-3,
Australia, New Zealand
Note: ROHS does not apply in this region.
NTTK15AA
250 VAC, Option 11C Standard European power cord,
Other EMEA, Kenya, Korea, Thailand, Indonesia, Vietnam, India,
Pakistan
NTTK16ABE6
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord
Switzerland
NTTK17ABE6
240 VAC, Option 11C UK power cord
Hong Kong, Ireland, United Kingdom, Singapore, Malaysia,
Bangladesh, Brunei, Sri Lanka
NTTK18ABE6
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
NTTK22ABE6
Argentina
Note: ROHS does not apply in this region.
A0814961
1.8 m (5.9 ft), 10 amp, IEC320-C13 Japan NTTK26AAE6
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1150E
• “Before you begin” (page 345)
•
“First-time installation” (page 346)
•
“Configuring the IP Phone 1150E” (page 346)
•
“Connecting the components” (page 347)
• “Startup sequence” (page 352)
Before you begin
Before installing the IP Phone 1150E, complete the following
pre-installation checklist
• Ensure one IP Phone 1150E boxed package exists for each IP Phone
1150E you install. For a list of IP Phone 1150E package components,
see Table 79 "Package components" (page 344).
• Ensure one Software License exists for each IP Phone 1150E you
install.
• Ensure the host Call Server is equipped with a voice Gateway Media
Card and a Signaling Server with the Line TPS application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.