User's Manual

Installation and configuration 347

the IP Phone 1150E using Element Manager, see Element

Manager System Reference - Administration (NN43001-632).

--End--

Connecting the components

Use Procedure 92 “Connecting the components” (page 347) to connect

the components for the IP Phone.

CAUTION

The IP Phone 1150E is shipped with the stand locked in

position. To avoid damaging the IP Phone, press the wall-mount

lever located under the base to release the stand and pull it

away from the phone.

Procedure 92

Connecting the components

Step Action

1 Press the wall-mount lever located under the base to release the

stand and pull it away from the phone. See Figure 61 "Release

the IP Phone 1150E from the stand" (page 347).

Figure 61

Release the IP Phone 1150E from the stand

2 Remove the stand cover. Pull upward on the center catch and

remove the stand cover. The cable routing tracks are now

accessible. See Figure 62 "Remove the stand cover" (page 348).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010