User's Manual

348 Nortel IP Phone 1150E

Figure 62

Remove the stand cover

3 Connect the global power supply (optional). Leave the global

power supply unplugged from the power outlet, connect the

global power supply to the AC adapter jack in the bottom of the

phone. Form a small bend in the cable, and then thread the

global power supply cord through the channels in the stand.

WARNING

Use your IP Phone 1150E with the approved Nortel

global power supply (model number NTYS17xxE6).

The IP Phone 1150E supports both AC power and Power over

Ethernet options, including IEEE 802.3af Power Classification 3.

To use Power over Ethernet, where power is delivered over the

CAT5-e cable, the LAN must support Power over Ethernet, and a

global power supply is not required. To use local AC power, the

optional global power supply can be ordered separately.

You must use CAT5-e (or later) cables if you want to use Gigabit

Ethernet.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010