User's Manual

350 Nortel IP Phone 1150E

Figure 64

Cable routing tracks

5 Install the Ethernet cable. Connect one end of the supplied

Ethernet cable to the back of your phone using the CAT5-e

connector (LAN Ethernet port), and thread the network cable

through the channel.

6 If you are connecting your PC through the phone, a second

CAT5-e cable is required. Only one cable is included with the IP

Phone 1150E package. Install the Ethernet cable connecting the

PC to the phone (optional). Connect one end of the PC Ethernet

cable to your phone using the CAT5-e connector (PC Ethernet

port) and thread it through the channel. Connect the other end to

the LAN connector on the back of your PC.

The LAN Ethernet port supports Auto-Media Dependent Interface

Crossover (MDIX). Auto-MDIX is supported only when the

Ethernet port is configured for autonegotiation. The PC Port

does not support Auto-MDIX.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010