User's Manual

36 Nortel IP Phone 2001
Power supply
250 VAC, Option 11C Standard European power cord,
Other EMEA, Kenya, Korea, Thailand, Indonesia, Vietnam, India,
Pakistan
NTTK16ABE6
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord
Switzerland
NTTK17ABE6
240 VAC, Option 11C UK power cord
Hong Kong, Ireland, United Kingdom, Singapore, Malaysia,
Bangladesh, Brunei, Sri Lanka
NTTK18ABE6
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
NTTK22ABE6
Argentina
Note: ROHS does not apply in this region.
A0814961
1.8 m (5.9 ft), 10 amp, IEC320-C13
Japan
NTTK26AAE6
For more information, and for information about previous versions of the IP
Phone, contact your Nortel representative.
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 2001:
• “Before you begin” (page 36)
•
“First-time installation” (page 37)
•
“Configuring the IP Phone 2001” (page 37)
•
“Connecting the components” (page 38)
•
“Startup sequence” (page 39)
Before you begin
Before installing the IP Phone 2001, complete the following pre-installation
checklist:
• Ensure one IP Phone 2001 boxed package exists for each IP Phone
2001 you install. For a list of IP Phone 2001 package components, see
Table 3 "Package components" (page 35).
• Ensure one Software License exists for each IP Phone 2001 you
install.
• Ensure the host Call Server is equipped with a Signaling Server that
runs the Line Terminal Proxy Server (LTPS) application.
• If a global power supply is required, make sure you use the correct
global power supply supplied by Nortel and country specific IEC cable.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.