User's Manual

Installation and configuration 367

Figure 67

Release the IP Phone 1165E from the stand

2 Remove the stand cover. Pull upward on the center catch and

remove the stand cover. The cable routing tracks are now

accessible. See Figure 68 "Stand cover removed" (page 367).

Figure 68

Stand cover removed

3 Your IP Phone 1165E can be powered by standard IEEE 802.3af

Power over Ethernet (Classification 2) or by AC power. To use

Power over Ethernet, where power is delivered from the Ethernet

Switch over the LAN cabling infrastructure to the phone (IEEE

802.3af), additional use of AC power is not supported.

To use local AC power, the approved global power supply

(NTYS17xx6) can be ordered from Nortel. A standard IEC cable,

with country-specific plug, is also required for use with the global

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010