User's Manual

368 Nortel IP Phone 1165E

power supply for local AC powering. To use local power, connect

the global power supply to the AC adapter jack in the bottom of

the IP Phone. Form a small bend in the cable, and then thread

the adapter cord through the channels in the stand.

Figure 69

IP Phone 1165E connections

4 Install the handset. Connect the end of the handset cable with

the short straight section into the handset. Connect the end of

the handset cable with the long straight section to the back of the

phone, using the RJ-9 handset jack. Form a small bend in the

cable, and then thread the handset cord through the channels

in the stand so that it exits behind the handset on the right side,

in the channel exit in the stand base marked with the handset

symbol. See Figure 70 "Cable routing tracks" (page 369).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010