User's Manual

Removing an IP Phone 1165E from service 373

3 To install the IP Phone 1165E, complete Procedure 96

“Configuring the IP Phone 1165E” (page 365). To configure the

IP Phone 1165E, see “Manual provisioning of IP Phones 2007

and 1100 Series” (page 541).

4 Enter the same TN and Node Number as the IP Phone 1165E

you replaced. The Call Server associates the new IP Phone

1165E with the existing TN.

--End--

Removing an IP Phone 1165E from service

Procedure 100

Removing an IP Phone 1165E from service

Step Action

1 Disconnect the IP Phone 1165E from the network or turn the

power off.

The service to the PC is disconnected as well if the PC connects

to the IP Phone 1165E.

If the IP Phone 1165E was automatically configured, the DHCP

lease expires and the IP address returns to the available pool.

2 In LD 11, enter the following:

REQ: OUT

TYPE: 1165

TN: LLL S CC UU

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010