User's Manual

406 Features
You can use the ScreenSaver option in the Display Settings dialog to
delay the start of the slide show after the phone becomes idle. Use the
Down and Up soft keys in the Display Settings dialog, ScreenSaver option,
to configure a delay of
•
1 minute
•
5 minutes
•
10 minutes
• 15 minutes
• 30 minutes
•
1 hour
• 2 hours
After the slide show starts, the phone displays the slideshow images from
the /image directory. Images display continuously, and rotate sequentially,
until the backlight timer deactivates the backlight. If you select Display Dim
Enabled, the slide show remains visible after the backlight dims.
If you enable the screen saver and there are no images to display, your
phone does not display a screen saver.
Screen saver images
Images for use with the screen saver must be 240 x 320 pixels (height x
width) and can be either 24-bit portable network graphic (PNG) or Joint
Photographic Experts Group (JPEG) format. (JPEG is Recommended)
Your Trivial File Transfer Protocol (TFTP) Server image directory can
contain both formats.
Name image files as screensaverN.png or screensaverN.jpg, depending
on the file format. N is a number from 0 to 99 inclusive. Because the
system ignores file extensions, ensure that you do not duplicate file
names.
You can store images either in the same folder TFTP Server folder as the
1165e.cfg file or in a sub-folder. If you store the images in a sub-folder,
ensure that the file path is included at the beginning of each file name.
The following list provides examples of the image files names.
• screensaver0.png is an image file stored in the 1165e.cfg file
• 1165Epics/screensaver1.jpg is an image file stored in a sub-folder
named 1165Epics
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.