User's Manual

Telephony features 407
Storing screen saver images
To send screen saver images to your phone, add a new section, called
[IMAGES], to the 1165e.cfg file. The [IMAGES] section can reside by itself
or with the [FW] and [FONT0
N] sections. Configure the section using the
command lines and specify the files you want to copy. Then use a TFTP
server to send images to the configuration file.
Following are the command lines you can use in the [IMAGES] section
of the 1165e.cfg file:
•
DOWNLOAD_MODE (required)
• VERSION (required)
•
DELETE_FILES (optional)
•
REPLACE_BKGRND (optional)
• FILENAME (one file name per image file)
• PROTOCOL (required; value = TFTP)
•
SERVER_IP (optional if the address is the same as the one sending
the .cfg file)
Following are the download modes that determine how the phone software
processes the [IMAGES] section:
•
DOWNLOAD_MODE=FORCED
•
DOWNLOAD_MODE=AUTO when the VERSION value is greater than
the current version value stored in the telephone
If you specify the forced download mode, your phone downloads the image
regardless of version number.
If you specify auto download mode, then VERSION specifies the version of
the images to download. Version applies to all files listed in the [IMAGES]
section. The factory default version value is 0. When images are written to
the software, the version value in the configuration file becomes the new
stored version value.
Deleting screen saver images
You can delete screen saver image files in the following ways:
• overwrite the file
• delete all the image files
To overwrite an image file, download an image file with an identical name.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.