User's Manual

414 Features
The ROD feature is supported on the following phones:
•
IP Phone 2002
• IP Phone 2004
•
IP Phone 2007
• IP Softphone 2050
• Mobile Voice Client 2050
• IP Phone 1120E
•
IP Phone 1140E
•
IP Phone 1150E
• IP Phone 1165E
The ROD feature has two functions:
•
Record an active telephone conversation on demand
•
Save an active recording
When you press the ROD key, the Call Recording (CR) application is
notified on the key press event and starts the telephone conversation
recording (as for any basic IP call recording). To stop the recording, press
the ROD key again. You can start or stop the recording by pressing the
ROD key anytime time during an active call. The Save/Delete key saves or
deletes the current recording.
Record and SaveCall are displayed on the phone for ROD and SAVE keys
respectively.
For more information about the Record on Demand feature, see Features
and Services Fundamentals (NN43001-106).
Network features
This section provides a description of the following IP Phone network
capabilities
• “Full Duplex ” (page 415)
• “802.1x Port-based network access control” (page 421)
• “802.1ab Link Layer Discovery Protocol” (page 422)
• “Dynamic Host Configuration Protocol” (page 424)
• “Gratuitous Address Resolution Protocol” (page 448)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.