User's Manual

Network features 417
• BcastPktRx
•
McastPktRx
•
802.1x Status
•
EAP Status
--End--
Use the following procedure to enable Full Duplex mode for the IP Phone
2007.
Procedure 108
Enabling Full-Duplex mode for IP Phone 2007
Step Action
1 Tap the Tools icon.
2 Enter the Tools menu password (if Password protection is
enabled). For information about Password Protection, see “Local
Tools menu” (page 471).
3 Tap the Network Configuration menu entry.
4 Use the Right navigation key to scroll and highlight the Duplex
list.
5 Press the Down navigation key to open list box.
6 Use the Up/Down navigation keys to scroll and highlight one of
the following options:
•
10BT Full—10 BT Full Duplex mode
• 100BT Full—100 BT Full Duplex mode
7 Tap the Apply&Reset soft key to save the changes and to
restart the IP Phone. The firmware settings are read and are
applied to UPLINK and the PC Ethernet Port.
--End--
When the IP Phone restarts, the firmware reads the setting for Full Duplex
mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and
speed accordingly.
Use the following procedure to confirm activation of Full Duplex mode.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.