User's Manual

Network features 419

7 Press Enter to select the setting and exit the list.

8 Press Apply to save the settings and restart the IP Phone. The

saved setting is read and applied to the NI ethernet port.

--End--

Use Procedure 111 “Checking Ethernet Statistics for IP Phone

1120E/1140E/1150E ” (page 419) to confirm activation of Full Duplex

mode.

Procedure 111

Checking Ethernet Statistics for IP Phone 1120E/1140E/1150E

Step Action

1 Double-press the Services key.

2 Press 2 to select Local Diagnostics, then press 3 to open the

Ethernet Statistics menu.

If Full Duplex mode is active, the following is displayed

• Link Status: UP

• Duplex Mode: Full

•

Network Speed: 10 Mb, 100 Mb, or 1 G

•

Auto Sense/Negotiate

— Auto-Negotiate Capability: No

— Auto-Negotiate Completed: No

--End--

Use Procedure 112 “Enabling Full-Duplex mode for IP Phone 1165E”

(page 419) to enable Full Duplex mode on the IP Phone 1165E.

Procedure 112

Enabling Full-Duplex mode for IP Phone 1165E

Step Action

1 Double-press the Services key to open the Local Tools menu.

2 Press the left navigation key to access the Configuration menu.

Then press 1 on the dialpad to open the Network Configuration

dialog.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010