User's Manual

44 Nortel IP Phone 2002

If power to the phone is interrupted after you install and configure an IP

phone, you are not required to reenter the IP Parameters, Node Numbers,

or Terminal Number (TN). There is also no need to again acquire the

firmware.

Description

The IP Phone 2002 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 2002

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 2002 network and CS 1000

connections.

Figure 4 "IP Phone 2002" (page 44) shows the IP Phone 2002.

Figure 4

IP Phone 2002

Components and functions

This section describes the following components and functions of the IP

Phone 2002:

• “Keys and functions” (page 45)

• “Services menu” (page 46)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010