User's Manual

Local Tools options 479
3. Headsets...
Use this item to configure the following headset preferences:
• Active Headset Device: Selects an active headset device (wired,
USB, or Bluetooth
®
).
You can select and configure a headset type as the active headset
device and connect the headset at a later time.
• Enable HID Commands: When the box is selected, full Human
Interface Device (HID) for supported headsets is provided. If the box
is not selected, only audio is provided for all devices. By default the
box is selected.
•
Headset type: When enabled, you can select a headset supported by
the Nortel USB headset adapter from a list. The default is the Nortel
Mobile Kit.
This option is available only when the IP Phone detects a Nortel USB
headset adapter.
ATTENTION
The IP Phone tunes the audio specifically to the selected headset type.
Nortel recommends that you ensure the correct headset type is selected to
achieve the optimum performance.
•
Back Light: When the box is selected, the buttons on the Nortel
Enhanced USB Headset adapter are illuminated or the blue LEDs on
the Nortel Mobile USB Headset Adapter are illuminated. By default the
box is selected.
This option is available only when the IP Phone detects a Nortel USB
headset adapter.
When you make changes in the Headset menu, press the Apply button
to permanently commit changes or press Cancel to restore the previous
headset preferences.
4. Bluetooth
®
Setup
You can access the Bluetooth
®
Setup options (IP Phone 1140E, IP Phone
1150E IP Phone 1165E) using either of the following two methods
• Double press the Headset key to open the Bluetooth
®
Setup dialog
box.
• Double press the Services key to open the Local Tools menu, press
1 on the dialpad to select Preferences and press 4 on the dialpad to
open the Bluetooth
®
Setup dialog box.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.