User's Manual

Automatic provisioning 495
Provisioning IP Phone parameters
By default, the IP Phone can automatically provision most parameters.
However, you can manually provision parameters. The Auto Provisioning
page provides the selection to manually override the parameter. Use the
Network Configuration menu item to configure IP Phone parameters.
Double-press the Services key to open the Local Tools menu and press 3
on the dial pad to open the Network Configuration menu.
The automatic provisioning menu supports both the graphical user
interface (GUI) and text-based user interface.
The following IP Phones support a GUI:
•
IP Phone 2007
• IP Phone 1120E
• IP Phone 1140E
•
IP Phone 1150E
•
IP Phone 1165E
The Configuration page appears when you select the Network
Configuration menu item. Any automatic provisioned parameters appear
dimmed.
For more information about the Auto Provisioning page for GUI, see
“Auto Provisioning page for graphical user interface” (page 496). For
information about the Configuration page for GUI, see “Configuration page
for graphical user interface” (page 499).
The following IP Phones support a text-based user interface:
•
IP Phone 1110
•
IP Phone 1210
• IP Phone 1220
•
IP Phone 1230
The Network Configuration menu shows the configuration parameters that
are configured as Manual on the Auto Provisioning page. Use the Up and
Down navigation keys to scroll through the main configuration options and
the Right or Left navigation keys to scroll through the sub configuration
options.
For information about the Auto Provisioning page for text user interface,
see “Auto Provisioning page for text user interface” (page 499).
For information the Configuration page for text user interface, see
“Configuration page for text user interface” (page 502).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.