User's Manual

498 Provisioning the IP Phones
Procedure 117
Configuring parameters automatically for GUI
Step Action
1 Press Auto on the Configuration page to switch to the Auto
Provisioning page.
2 Perform one of the following actions:
•
Press the AllMan soft key to change all parameters to be
auto-provisioned.
• Use the dial pad to enter the number associated with the
parameter, or use the navigation keys to scroll and highlight
the specific parameter (up/down navigation takes you from
group to group, while left/right navigation takes you from item
to item). Press the Enter key to check the parameter, making
it "Auto" provisioned.
3 To exit and save, press the Config key to return to the Network
Configuration page, then press Apply.
Press Cancel to exit the Configuration menu without saving
the changes. On the IP Phone 1165E this returns to the
Configuration menu while on the other GUI phones it exits the
local menu.
--End--
Procedure 118
Configuring parameters manually for GUI
Step Action
1 Press Auto on the Configuration page to switch to the Auto
Provisioning page.
2 Perform one of the following actions:
•
Press the AllMan soft key to change all parameters to be
manually provisioned.
• Use the dial pad to enter the number associated with the
parameter, or use the navigation keys to scroll and highlight
the specific parameter (up/down navigation takes you from
group to group, while left/right navigation takes you from item
to item). Press the Enter key to uncheck the parameter,
making it "Manual" provisioned.
3 To exit and save, press the Config key to return to the Network
Configuration page, then press Apply.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.