User's Manual

Automatic provisioning 501

14.

Auto Recover Flag

SSH User ID

SSH Password

15.

Screen Contrast

Screen Brightness

Screen Backlight

Display DIM Enable

16.

Headset Type

Bluetooth

Enable

17.

Bold

Use the following procedures to configure all parameters or specific

parameters to automatic provisioning or manual provisioning for a text user

interface.

Procedure 119

Conﬁguring parameters automatically for text user interface

Step Action

1 Press Auto on the Configuration page to switch to the Auto

Provisioning page.

2 Perform one of the following actions:

• Press the AllAut content-sensitive soft key on the Auto

Provisioning page to automatically configure all parameters.

• Use the dial pad to enter the number associated with the

parameter, or use the navigation keys to scroll and highlight

the specific parameter. Then press Auto to configure specific

parameters, which were previously configured automatically.

3 Press Enter to save the settings or press Cancel to exit the

Network Configuration without saving changes.

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010