User's Manual

530 Provisioning the IP Phones
• IP Phone 1220
• IP Phone 1230
• IP Phone 1110
•
IP Phone 1120E
• IP Phone 1140E
• IP Phone 1150E
• IP Phone 1165E
Use [*][*][7][3][6][3][9] IP Phone MAC address [#][#] to reset the IP Phone
parameters to the factory default.
Table 129 "Factory default values" (page 530) shows the factory default
values for the IP Phone parameters.
Table 129
Factory default values
Parameter Factory default value
Enable 802.1x (EAP) Disabled
802.1x Device ID None
802.1x Password None
Enable 802.1ab (LLDP) Yes
DHCP mode On
Set IP
0.0.0.0
Net Mask
0.0.0.0
Gateway
0.0.0.0
S1 IP
0.0.0.0
S1 Port
0
S1 Action
1
S1 Retry
255
S1 PK 0xffffffffffffffff
S2 IP
0.0.0.0
S2 Port
0
S2 Action
1
S2 Retry
255
S2 PK 0xffffffffffffffff
Network Speed Auto
Network Duplex Mode Auto
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.