User's Manual

Provisioning parameters 535
Description Describe the option.
Dependency Show any dependency that controls when that option is enabled or
can be used.
If the prompt has a dependency, the dependency appears on the
same line as the prompt, and input options start on the next line of
the table.
If an option has a dependency, the dependency appears on same
line as the option and applies only to that option.
If both the prompt and the option have dependencies, they are
cumulative between the prompt and the option and
and is used to
show multiple dependencies.
Table 132 "Provisioning parameters for text-based IP Phones" (page
535) lists the provisioning parameters for the IP Phone 1110, IP Phone
1210, IP Phone 1220, and IP Phone 1230.
The parameters appear in order of appearance.
Table 132
Provisioning parameters for text-based IP Phones
Config menu
option
Options or input
Description Dependency
EAP mode Disable EAP disabled
MD5 MD5 encryption
PEAP PEAP encryption
TLS TLS encryption
ID 1 Up to 32 characters EAP ID EAP mode = MD5
ID 2 Up to 32 characters EAP ID EAP mode = MD5 of
TLS
Password Up to 32 characters EAP password EAP mode = MD5,
PEAP, or TLS
Enable
802.1ab
(LLDP)
0-No LLDP not used
1-Yes Enable LLDP
DHCP 0-No Static IP and Partial
used
1-Yes DHCP used
Cached IP 0-No Must receive response
to assign IP Phone IP
address
DHCP = 1
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.