User's Manual

542 Manual provisioning of IP Phones 2007 and 1100 Series
For the IP Phones 1100 Series, you can access the Network Configuration
menu in one of the following ways:
•
Press the 4 soft keys at the bottom of the display area in sequence
from left to right when the IP Phone boots and the text Nortel appears
in the display.
• Double-press the Services key. To make a menu selection, do one of
the following:
—
On the IP Phones 1120E, 1140E, and 1150E, you can press the
number associated with the menu item (for example, press 3 for
Network Configuration) or you can use the navigation keys to scroll
through the list of menu items.
— On the IP Phone 1165E, you can left or right navigate to the menu
and then press the number associated with the menu item (for
example, press 1 for Network Configuration) or you can use the
navigation keys to scroll through the list of menu items.
For more information about provisioning parameters for the IP Phones, see
“Provisioning the IP Phones” (page 491).
Table 135 "Provisioning parameters legend" (page 543) provides a legend
for Table 136 "Provisioning parameters for graphic-based IP Phones"
(page 544).
Table 133
Keys and Descriptions for 1165E Manual Page
Up Move highlight up an item
Down Move highlight down an item
Enter Highlight on list item: open list
In list: select highlighted item and close list
Highlight on editable item: start edit mode
Highlight on checkbox item: toggle checkbox state
Apply Save changes and reboot phone
Auto Go to Auto provision page
Cancel Exit Network Configuration without saving changes
In edit mode
Up Exits Edit mode, moves highlight up an item
Down Exits Edit mode, moves highlight up an item
Left Moves edit cursor to the left
Right Moves edit cursor to the right
Enter Exit edit mode
OK Exit edit mode
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.