User's Manual

56 Nortel IP Phone 2002

a Disable the password.

b Set the password as non-NULL.

3 Press OK when the node number displays.

If Then

the node password is enabled

and is not NULL

a password screen displays. Go

to Step 4.

the node password is disabled a TN screen displays. Go to Step

4 Enter the password at the password screen and press OK.

A TN screen displays.

To obtain the password, enter the nodePwdShow command in

Element Manager. For further information, see

Element Manager

System Reference - Administration (NN43001-632).

5 Select the Clear soft key to clear the existing TN.

6 Enter the new TN.

--End--

Replacing an IP Phone 2002

ATTENTION

Two IP Phones cannot share the same TN. You must remove the IP Phone

2002 that currently uses the TN.

Procedure 9

Replacing an IP Phone 2002

Step Action

1 Obtain the node and TN information of the phone you want to

replace.

2 Disconnect the IP Phone 2002 that you want to replace.

3 Follow “Configuring the IP Phone 2002” (page 52) to install

the IP Phone 2002. To configure the IP Phone, see “Manual

provisioning of IP Phones 2000 Series” (page 551).

4 Enter the same TN and Node Number as the IP Phone 2002 you

replaced. The Call Server associates the new IP Phone 2002

with the existing TN.

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010