User's Manual

Configure the headsets 563
8 Press Enter to exit the edit mode.
9 Press the Apply&Reset soft key to save the change and to
restart the phone.
--End--
Procedure 122
Configure the Bluetooth
®
wireless technology administration setting (IP
Phone 1165E)
Step Action
1 Double-press the Services key.
2 Press the left navigation key to get to the Configuration menu.
Press 1 to open the Network Configuration menu or use the
Up/Down navigation keys to highlight the Network Configuration
option and then press Enter.
3 Use the Up navigation key to navigate to the Enable Bluetooth
®
box. The current setting is displayed.
4 Press the Enter key to open the list.
5 Use the Up/Down navigation keys to scroll and highlight the
desired Bluetooth
®
wireless technology mode.
6 Press Enter to select the mode and to close the list.
7 Press the Apply soft key to save the change and to restart the
phone.
--End--
The new mode takes affect when the IP Phone restarts. If the
administrative control enabled Bluetooth
®
wireless technology on the
phone, the item 4. Bluetooth
®
Setup appears in 1. Preferences
submenu.
After setting administrative control, it is recommended that the Partial
Menu Lock feature be activated to prevent users from changing the
administration setting. For further information about the Partial Menu Lock
feature, see “Local Tools menu” (page 471).
Configure the headsets
You configure the headsets on the Headsets page. To access the
headsets page, select Local Tools > Preferences > Headsets....
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.