User's Manual

574 IP Phone diagnostic utilities

• Reset — to clear the data

•

Exit — to return to the Network Diagnostic Tools menu.

--End--

Procedure 125

Executing TraceRoute

Step Action

1 Select TraceRoute from the Network Diagnostic Tools

submenu.

2 Press the IP soft key and enter the IP address to trace.

3 Press the Tracert soft key. The results of the TraceRoute

appear on the display.

4 Use the Navigation keys to browse the data. See Figure 90

"TraceRoute data display screen" (page 585).

Tip: Press the Tracert soft key again to stop the route tracing.

5 Press one of the following soft keys

•

Reset — to clear the data

•

Exit — to return to the Network Diagnostic Tools menu

--End--

Procedure 126

Accessing Ethernet Statistics

Step Action

1 Select Ethernet Statistics from the Network Diagnostic Tools

menu. The Ethernet statistics appear on the display.

2 Use the Navigation keys to browse the data. See Figure 91

"Ethernet Statistics data display page" (page 586).

3 Press one of the following soft keys

• Reset— to clear the data and reset the statistic counter

• Exit — to return to the Network Diagnostic Tools menu

--End--

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010