User's Manual

60 Nortel IP Phone 2004

If power to the phone is interrupted after you install and configure an IP

phone, you are not required to reenter the IP Parameters, Node Numbers,

or Terminal Number (TN). There is also no need to again acquire the

firmware.

Description

The IP Phone 2004 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 2004

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 2004 network and CS 1000

connections.

Figure 7 "IP Phone 2004" (page 60) shows the IP Phone 2004.

Figure 7

IP Phone 2004

Components and functions

This section describes the following components and functions of the IP

Phone 2004:

• “Keys and functions” (page 61)

• “Services menu” (page 62)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010