User's Manual

602 IP Phone diagnostic utilities
Tracing route to: (x.x.x.x) over a maximum of
y hops
(where x.x.x.x is the IP address chosen in step 4 and y is
the number of hops displayed at the top of the screen)
The Exit soft key changes to Stop and the other soft keys
become blank.
The IP Phone traces the route to the address for the configured
number of server hopes, displaying the hop number (starting at
0), the time in milliseconds, and the IP address.
When the trace is complete, the screen displays the following
Trace complete.
10 To stop Tracert before it completes, tap the Stop soft key.
The Stop soft key becomes the Exit soft key when Tracert
stops.
11 Tap the Exit soft key to return to the Diagnostics menu.
--End--
Procedure 148
Using Ethernet Statistics tool
Step Action
1 Tap the Tools icon.
2 Tap the Local Diagnostics menu entry.
3 Tap the Ethernet Statistics soft key.
The tool displays Reset, NIPort, and EXIT soft keys, and the
statistics for the Network Interface Port (NIPort).
The following statistics are displayed
• Link Status
• Duplex Mode
• Network Speed
•
AutoSense/Negotiate Capability
• AutoSense/Negotiate Completed
•
Port VLAN Priority
• Port VLAN ID
• Packet Collision
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.